Surfacing in
Guildford
Period homes off the Hog's Back, new builds around the A3 corridor.
See work in Guildford→
Surfacing in Weybridge
Permeable resin-bound aggregates, smooth and SuDS-compliant. — for Weybridge homeowners and properties.
Resin in Weybridge
Weybridge has a concentration of high-value residential property that is unusual even by Surrey standards. On St George's Hill and within the Burwood Park estate, driveways are often the first thing visitors see and form a real part of the property's presentation. Resin bound has become the finish of choice on many of these plots because it delivers exactly what the setting demands: a seamless, contemporary surface that holds its appearance year after year without weeding, re-sanding, or patching. The colour range and the aggregate size can be tailored to sit with brick, render, or stone in a way that generic tarmac or imprinted concrete cannot.
We mix on site in a forced-action mixer and trowel by hand — the only method that produces the even aggregate distribution and consistent depth that a prestige property warrants. The base we build underneath is always specified to the plot: on the heavier soils around the lower parts of Weybridge and towards the Thames we add a geotextile membrane and deeper open-graded sub-base so the ground below does not move under the finished surface. The resin you see is only as permanent as what is underneath it, and that is where most of the work happens before we pour a single mix.
How we work
We come out, measure up, and talk through what you want.
Spec, schedule, and price in writing — no surprises.
Rip-out, prep, surface. Tidy site each evening.
Walk-through on completion and a call back if anything settles in.
Driveways on St George's Hill tend to be long, gated, and set into landscaped grounds. A resin surface on this scale needs to be laid in carefully managed bays, with wet edges kept live so the join between sections is invisible in the finished surface. Falls need to be designed across the full length — not just locally at the house — so water is directed away from gates, planted beds, and any low points in the ground profile. We walk the run of the drive at the site visit specifically to map the falls before we quote.
Burwood Park has a different character: a tight estate of detached houses with defined frontages and shared access roads. Driveways here are shorter but visible from the road, and the aggregate colour matters. Natural tones — Buff Flint, Golden Gravel, and the silver-grey mixes — tend to sit best against the brick and render typical of the estate and avoid the slightly industrial look of uniform grey or dark aggregate on a residential frontage.
Resin bound on a permeable open-graded base is the simplest way to meet SuDS drainage requirements for a new or replacement driveway without installing a separate soakaway. Water passes vertically through the surface into the sub-base and away. This matters in Weybridge, where properties along and near the Thames are in areas where the Environment Agency takes surface water management seriously, and where any addition to the local drainage burden can be an issue.
The one thing to check is that the base under any existing surface being overlaid is also permeable and free-draining. Resin on a closed tarmac sub-base cannot drain properly and is not SuDS-compliant regardless of the resin itself. We assess this at the site visit and will tell you if the existing base needs to be opened up or replaced before the resin layer goes down — a step that costs more upfront but is the only way to get a system that works as it should.
FAQ
Yes, provided the complete system — surface and base — is open-graded and free-draining. Resin bound trowelled over a permeable sub-base lets water drain vertically into the ground, meeting the requirements of the General Permitted Development Order without a separate soakaway. We confirm at the site visit that the base being used is appropriate and document the specification in the written quote.
The resin layer itself goes down in a day or two once the base is ready. A full job including any excavation, sub-base build, and edge restraint setting typically runs four to six working days for a standard-sized drive. On longer St George's Hill or Burwood Park driveways we give you a full programme with the quote so you can plan around gate and access restrictions.
Warm natural tones — Buff Flint, Golden Gravel, and silver-grey mixes — suit most of the brick and painted-render houses in the area. Darker graphite or charcoal aggregates can look sharp against contemporary architecture but can read as overly stark on a traditional frontage. We bring samples to the site visit so you can hold them against the house in natural light before you decide.
Yes. Weybridge is within our regular working area and we can usually arrange a visit within a few working days. We measure the area, assess the existing surface and drainage, discuss aggregate options, and produce a written quote and specification — not an estimate over the phone.
Tell us roughly what you'd like done. We'll come out and quote in writing.
Nearby
Surfacing in
Period homes off the Hog's Back, new builds around the A3 corridor.
See work in Guildford→Surfacing in
From Hook Heath driveways to commercial yards near Sheerwater.
See work in Woking→Surfacing in
Stoke D'Abernon homes and the Fairmile estates.
See work in Cobham→Surfacing in
Claygate, Hinchley Wood, and Esher village driveways.
See work in Esher→